ESAB Rebel EMP 285ic Multiprocess Welder, 120/230 V Single Phase

The Rebel EMP 285ic is an industrial multiprocess welder for stick, TIG, MIG and flux-cored welding. This single-phase version runs on 120/230 V input and delivers up to 300 A, with sMIG adaptive arc control, a 4-roll drive system and a multilingual TFT display.

On single-phase input the current range is 5-300 A, with a 300 A / 34 V maximum output. The 4-roll drive system takes solid wire to .052 in. (1.4 mm) and cored wire to 1/16 in. (1.6 mm), fed at 60-800 ipm. Spools of 4, 8 or 12 in. fit, TIG rods are limited to 3/16 in. (5.0 mm), and stick electrodes go to 5/32 in. (4.0 mm).

It is used in civil construction, agricultural equipment work, training schools, repair and maintenance, industrial production and general fabrication. Accessories for the machine include a Tweco 200A spool gun (12 ft), a TIG foot control with a 15 ft cable, a Rebel single-cylinder cart and a 230 V to 120 V power adapter.

Highlights

• Stick, TIG, MIG and flux-cored welding in one industrial machine

• Single-phase 120/230 V input; 5-300 A range, 300 A / 34 V maximum output

• 4-roll drive: solid wire to .052 in. (1.4 mm), cored wire to 1/16 in. (1.6 mm)

• Wire feed 60-800 ipm (1.5-20.3 m/min); takes 4, 8 and 12 in. spools

• 70 lbs (32 kg) with a four-handle roll cage; IP23S enclosure

• Supply plug: NEMA 6-50P (230 V)

Specifications

Good to know

• Check the input power (voltage, phase and amperage) against your supply before you order.