ESAB Rogue EMP 210 PRO Multiprocess Welder

The Rogue EMP 210 PRO is a multiprocess welder that combines full-feature synergic MIG programs with DC TIG across a 10-210 A amperage range. TIG is DC only, so aluminum cannot be TIG welded. Power factor correction, Arc Dynamics and a 5-inch TFT screen round out the controls.

The machine stores up to 10 settings for recall, has a multi-language display and drops into an energy save mode once it has been idle for 2 minutes. Wire feed speed is 75-650 ipm and maximum plate thickness is 3/8 in. The unit is spool gun ready; a spool gun is not included.

The package supplies the power source, a Fusion 180 MIG gun that accepts Velocity consumables, a Tweco 17V TIG torch (50 mm Dinse) with accessory kit, an electrode holder, a ground clamp, an argon/CO2 regulator with gas hose, a 115V/230V power adapter, a 2 lb spool of 70S6 wire and drive rolls in two sizes. Weight is 37.3 lbs, and the unit measures 23.2 in. L x 8.7 in. W x 15.2 in. H.

Highlights

• Synergic MIG programs plus DC TIG; DC only, no aluminum TIG

• Amperage range 10-210 A; wire feed speed 75-650 ipm

• Tweco 17V TIG torch (50 mm Dinse) and accessory kit included

• Stores up to 10 settings; 5-inch multi-language TFT screen

• 37.3 lbs; 23.2 x 8.7 x 15.2 in. (L x W x H)

• Plate up to 3/8 in. thick; spool gun ready

Specifications

What's in the box

• Rogue EMP 210 PRO power source

• Fusion 180 MIG gun (accepts Velocity consumables)

• Tweco 17V TIG torch with 50 mm Dinse and accessory kit

• Tweco electrode holder

• Ground clamp

• Argon/CO2 regulator with gas hose

• 115V/230V power adapter

• 2 lb spool of 70S6 wire

• Drive rolls in two sizes, including .030/.035

Good to know

• Check the input power (voltage, phase and amperage) against your supply before you order.