FEIN JMC MAGFORCE 90 Magnetic Drill with Structural Steel TCT Cutter Set

This version of the FEIN JMC MAGFORCE 90 adds five carbide (TCT) annular cutters with 3/4 in. Weldon shanks, aimed at steel fabrication, bridges and truck frames. Holes up to 1-3/8 in. (35 mm) are within reach of the compact drill, which weighs 18.75 lbs, measures 6-5/8 x 11-3/8 in. and has a ratchet handle for overhead jobs.

Clean, burr-free holes come from cutting teeth that are all identical in geometry, and carbide gives a long-lasting cutter that suits harder material and faster spindle speeds. The set covers 9/16, 11/16, 13/16, 15/16 and 1-1/16 in. at a 1 in. cutting depth, with two centering pins, a Magbrush, Slugger cutting paste and an L-BOXX 136 accessory case.

On the drill, reversible rotation and FEIN's spindle sleeve feed allow cuts as deep as 1-3/8 in. The Magbrush lifts metal chips off the work with its magnet, and the cutting paste works in normal, horizontal and inverted drilling alike while extending cutter life.

Highlights

• Compact mag drill for holes up to 1-3/8 in. (35 mm); 18.75 lbs

• Five carbide cutters from 9/16 to 1-1/16 in. diameter, 1 in. deep

• Uniform tooth geometry for clean, burr-free holes

• Carbide cutters suit harder material and higher spindle speeds

• Forward/reverse, spindle sleeve feed and ratchet handle

• Centering pins, Magbrush, cutting paste and L-BOXX 136 included

Specifications

What's in the box

• JMC MAGFORCE 90 magnetic base drill

• Carbide (TCT) annular cutters, 1 in. cutting depth: 9/16, 11/16, 13/16, 15/16 and 1-1/16 in. (1 each)

• Centering pins, 1/4 x 3-1/4 in. (6.35 x 82 mm) (2)

• Magbrush (1)

• Slugger cutting paste (1)

• L-BOXX 136 accessory case (1)

Good to know

• Check the input power (voltage, phase and amperage) against your supply before you order.