Generac Next Gen 28kW Home Standby Generator (25kW NG), Air-Cooled, 997cc, 7282
The Generac Next Gen 28kW is an air-cooled home standby generator rated 28kW on LP and 25kW on natural gas, driven by a 997cc engine with electronic fuel and ignition control. Its radio covers cellular, Wi-Fi and Bluetooth connectivity, the Power Zone 200 controller and sensors give four times the diagnostics capability, and the maintenance interval is 200 hours.
The 997cc engine has a new head design, hydraulic lifters that need no adjustment, an oil level sensor and a fuel pressure sensor, and its 200-hour maintenance interval compares with a 100-hour industry standard. TruePower Electrical Technology keeps total harmonic distortion under 5%, and Smart Exercise skips a planned exercise when the unit has already run over five minutes straight within the last 72 hours.
The sound-attenuated enclosure holds noise to 67 dBA or less and is rated for hurricane-force winds of up to 150 MPH, with a sloped roof against water, ice and snow buildup, a rear air intake, easy-to-remove panels and a lift-out front for routine maintenance. Its footprint matches the other Next Gen models, and the unit is certified for installation 18 inches from a home, meets the 2017 NEC shutdown switch requirement and needs a 12-volt AGM Group BTX20L battery with at least 310 cold cranking amps.
Highlights
28 kW on LP, 25 kW on natural gas; air-cooled
997cc engine with hydraulic lifters, EFIC and fuel pressure sensor
200-hour maintenance interval
Cellular, Wi-Fi and Bluetooth radio with Power Zone 200 controller
Sound levels at or below 67 dBA; withstands winds up to 150 MPH
Certified for installation 18 inches from a home
Specifications
Brand | Generac |
Manufacturer part number | 7282 |
Output | 28 kW on LP; 25 kW on natural gas |
Cooling | Air-cooled |
Engine | 997cc; new head design; hydraulic lifters (no adjustments) |
Engine controls | EFIC; oil level sensor; fuel pressure sensor |
Controller | Power Zone 200 |
Power quality | Less than 5% THD |
Connectivity | Cellular, Wi-Fi and Bluetooth |
Maintenance interval | 200 hours |
Sound level | At or below 67 dBA |
Wind rating | Up to 150 MPH |
Installation offset | Certified for 18 in to home |
Code compliance | 2017 NEC shutdown switch requirement |
Battery required | 12-volt AGM, Group BTX20L, minimum 310 CCA |
Compatible with | Ecobee thermostat; PWRCell system |
Good to know
Engine-driven equipment gives off carbon monoxide: run it outdoors only, away from doors, windows and vents.


