Hypertherm Powermax45 SYNC Plasma Cutter, 20 ft Hand Torch, 200-240V, 088560

The Hypertherm Powermax45 SYNC plasma cutter cuts, gouges and marks with single-piece cartridges, offering a 5/8 in. recommended cut and 1-1/8 in. severance on 200-240 V single-phase power. This hand system comes with a 75° SmartSYNC hand torch on a 20 ft lead, a 20 ft work clamp and one 45 A hand cutting cartridge; it has no CPC port for CNC hook-up.

RFID-enabled SmartSYNC torches set up the process automatically, and each single-piece cartridge records trackable usage data. End-of-life detection at the torch and the power source shows when to change a cartridge, and a spent cartridge keeps that status so it cannot be reused by mistake. The torch handle adds a cap sensor that confirms the cartridge is seated, a cartridge reader, ready-state LEDs, a 7-step amperage LED with seven presets, a lock switch for consumable changes with the power supply on, and a safety trigger.

Input current is 39 A at 200 V and 33 A at 240 V, and an engine drive needs 10 kW for the full 45 A output. Recommended air pressure is 90 psi (5.9 bar) for cutting and 60 psi (4.1 bar) for gouging. The power supply weighs 31 lbs with torch, measures 17.4 x 6.8 x 14.1 in. (D x W x H) and has a 10 ft input power cable. The same FineCut cartridge both cuts and marks. Applications include job-shop fabrication, property and plant maintenance, HVAC and mechanical contracting, trade-school training, and agricultural and equipment maintenance.

Highlights

• Cut capacity: 5/8 in. recommended, 1-1/8 in. severance

• Up to 45 A output on 200-240 V single-phase, 50/60 Hz input

• Single-piece SYNC cartridge with RFID setup and end-of-life detection

• 75° SmartSYNC hand torch with a 20 ft lead and 20 ft work clamp

• No CPC port for CNC hook-up

• 31 lbs with torch; 10 kW engine drive for full output

Specifications

What's in the box

• 45 SYNC power supply

• SmartSYNC hand torch with 20 ft lead and 20 ft work clamp

• 45 A SYNC hand cutting cartridge (1)

• Operator and safety manuals

Good to know

• Check the input power (voltage, phase and amperage) against your supply before you order.