Hypertherm Powermax45 SYNC Plasma Cutter, 25 ft Machine Torch, CPC/Serial Ports

The Hypertherm Powermax45 SYNC plasma cutter in this mechanized package has a 180° SmartSYNC machine torch on a 25 ft lead plus both CPC and serial ports for CNC hook-up. The SYNC system cuts, gouges and marks, with a 5/8 in. recommended cut and 1-1/8 in. severance on 200-240 V single-phase power.

The kit holds the power supply, the machine torch with its 25 ft lead, a 20 ft work clamp, one 45 A mechanized cutting cartridge, three mechanized Ohmic clips, and the operator and safety manuals. Input current is 39 A at 200 V and 33 A at 240 V, and an engine drive needs 10 kW for the full 45 A output. Recommended air pressure is 90 psi (5.9 bar) for cutting and 60 psi (4.1 bar) for gouging. The power supply weighs 31 lbs with torch, measures 17.4 x 6.8 x 14.1 in. (D x W x H) and has a 10 ft input power cable.

RFID-enabled SmartSYNC torches set up the process automatically, and each single-piece cartridge records trackable usage data. End-of-life detection at the torch and the power source shows when to change a cartridge, and a spent cartridge keeps that status so it cannot be reused by mistake. A cap sensor confirms the cartridge is seated, and a cartridge reader passes the RFID chip's data to the power source.

Highlights

• Cut capacity: 5/8 in. recommended, 1-1/8 in. severance

• Up to 45 A output on 200-240 V single-phase, 50/60 Hz input

• CPC and serial ports for CNC hook-up

• 180° SmartSYNC mechanized torch with a 25 ft lead and 20 ft work clamp

• Mechanized cutting cartridge and three mechanized Ohmic clips supplied

• 31 lbs with torch; 10 kW engine drive for full output

Specifications

What's in the box

• 45 SYNC power supply

• 180° SmartSYNC mechanized torch with 25 ft lead and 20 ft work clamp

• 45 A SYNC mechanized cutting cartridge (1)

• Mechanized Ohmic clips (3)

• Operator and safety manuals

Good to know

• Check the input power (voltage, phase and amperage) against your supply before you order.