top of page
Hypertherm Powermax65 SYNC Plasma Cutter, 25 ft Machine Torch, CPC Port, Remote
Hypertherm Powermax65 SYNC Plasma Cutter, 25 ft Machine Torch, CPC Port, Remote
Hypertherm Powermax65 SYNC Plasma Cutter, 25 ft Machine Torch, CPC Port, Remote
SKU: 083348

Hypertherm Powermax65 SYNC Plasma Cutter, 25 ft Machine Torch, CPC Port, Remote

$3,097.65Price
Quantity

The Hypertherm Powermax65 SYNC plasma cutter in this mechanized package pairs the CPC-port power source with a 180° SmartSYNC machine torch on a 25 ft lead, a 25 ft work clamp and a remote. It cuts and gouges up to 3/4 in. (20 mm) on 200-600 V single- or three-phase power, with two 65 A and one 30-45 A mechanized cartridges supplied.

The 180° machine torch is built for mechanized plasma cutting. Like every SmartSYNC torch, it picks up the RFID data on its single-piece cartridge and passes it to the power source, which sets up the process automatically. A sensor in the torch cap checks that the cartridge is seated properly, and both the torch and the power source detect a worn-out cartridge, which then stays flagged as spent and cannot be used again. Color-coded cartridges come in hand, gouging, mechanized/stand-off and FlushCut/HyAccess types, with consumable life data tracking.

Input is 200-600 V, single- or three-phase, at 50-60 Hz. The power source weighs 54 lbs and measures 19.7 x 9.2 x 17.9 in. (L x W x H). Travel speed is 20 ipm on 3/4 in. metal, and the recommended air supply is 85 psi (5.9 bar) at 400 scfh (6.7 scfm). End-of-life detection switches off when a Fine Cut hand cartridge is fitted, when amperage is set below 40 A, or when output is below 55 A without cartridge communication.

Highlights

  • Cuts and gouges up to 20 mm (3/4 in.); 20 ipm travel speed on 3/4 in. metal

  • 180° SmartSYNC torch with 25 ft lead and 25 ft work clamp, plus a remote

  • Power source with CPC port; 200-600 V single- or three-phase input

  • Two 65 A mechanized cartridges and one 30-45 A mechanized cartridge supplied

  • Power source weighs 54 lbs; 19.7 x 9.2 x 17.9 in. (L x W x H)

  • Color-coded single-piece cartridges with RFID consumable life tracking

Specifications

Brand

Hypertherm

Manufacturer part number

083348

Processes

Air plasma cutting and gouging

Cut capacity

Up to 20 mm (3/4 in.)

Input power

200-600 V, 1- or 3-phase, 50-60 Hz

Travel speed

20 ipm on 3/4 in. metal

Recommended air pressure

85 psi (5.9 bar); 400 scfh (6.7 scfm)

Dimensions

19.7 x 9.2 x 17.9 in. (L x W x H)

Power source weight

54 lbs

Torch

180° SmartSYNC torch, 25 ft lead

Work clamp

25 ft

CPC port

Included

Remote

Yes

Cartridges

Single-piece, color-coded: hand, mechanized/stand-off, gouging, FlushCut/HyAccess

What's in the box

  • Powermax65 SYNC power source with CPC port

  • 180° SmartSYNC torch with 25 ft lead

  • 25 ft work clamp

  • 65 A mechanized cartridges (2)

  • 30-45 A mechanized cartridge (1)

  • Operator and safety manuals

Good to know

  • Check the input power (voltage, phase and amperage) against your supply before you order.

    bottom of page