top of page
Hypertherm Powermax85 SYNC Plasma Cutter, 25 ft 75° and 15° Hand Torches, 087187
SKU: 087187

Hypertherm Powermax85 SYNC Plasma Cutter, 25 ft 75° and 15° Hand Torches, 087187

$4,298.49Price
Quantity

The Hypertherm Powermax85 SYNC plasma cutter in this hand-cutting package comes with two SmartSYNC hand torches, a 75° and a 15°, each on a 25 ft lead, and it cuts and gouges up to 1 in. (25 mm). It runs on 200-600 V single- or three-phase power and includes a 25 ft work clamp, two 85 A drag cartridges and two 45-85 A Max Removal gouging cartridges.

This power source has no CPC port for automated hookup, so the package is set up for handheld plasma cutting and gouging. Each SmartSYNC torch picks up the RFID data on its single-piece cartridge and passes it to the power source, which sets up the process automatically. A sensor in the torch cap checks that the cartridge is seated properly, LEDs on the handle show when the system is ready, and a seven-step amperage LED offers seven presets. A torch lock switch lets the operator swap consumables while the power supply stays on, and a safety trigger guards against accidental starts.

The power source weighs 67 lbs and measures 19.7 x 9.2 x 17.9 in. (L x W x H). Travel speed is 20 ipm on 1 in. metal, and the recommended air supply is 85 psi (5.9 bar) at 400 scfh (6.7 scfm). The color-coded cartridges come in hand, gouging, mechanized/stand-off and FlushCut/HyAccess types, and consumable life data is tracked. Both the torch and the power source detect a worn-out cartridge, which then stays flagged as spent and cannot be used again.

Highlights

  • Cuts and gouges up to 25 mm (1 in.); 20 ipm travel speed on 1 in. metal

  • 75° and 15° SmartSYNC hand torches with 25 ft leads and a 25 ft work clamp

  • No CPC port; 200-600 V single- or three-phase input

  • Two 85 A drag cartridges and two 45-85 A Max Removal gouging cartridges supplied

  • Power source weighs 67 lbs; 19.7 x 9.2 x 17.9 in. (L x W x H)

  • Color-coded single-piece cartridges with RFID consumable life tracking

Specifications

Brand

Hypertherm

Manufacturer part number

087187

Processes

Air plasma cutting and gouging

Cut capacity

Up to 25 mm (1 in.)

Input power

200-600 V, 1- or 3-phase, 50-60 Hz

Travel speed

20 ipm on 1 in. metal

Recommended air pressure

85 psi (5.9 bar); 400 scfh (6.7 scfm)

Dimensions

19.7 x 9.2 x 17.9 in. (L x W x H)

Power source weight

67 lbs

Torches

75° and 15° SmartSYNC hand torches, 25 ft leads

Work clamp

25 ft

CPC port

Not included

Cartridges

85 A drag (2); 45-85 A Max Removal gouging (2)

What's in the box

  • Powermax85 SYNC power source

  • 75° and 15° SmartSYNC torches with 25 ft lead

  • 25 ft work clamp

  • 85 A drag cartridges (2)

  • 45-85 A Max Removal gouging cartridges (2)

  • Operator and safety manuals

Good to know

  • Check the input power (voltage, phase and amperage) against your supply before you order.

    bottom of page