Hypertherm Powermax85 SYNC Plasma Cutter, 25 ft 75° Hand Torch, 200-600V, 087183
The Hypertherm Powermax85 SYNC plasma cutter with a 25 ft 75° hand torch cuts and gouges up to 1 in. (25 mm) and runs on 200-600 V single- or three-phase power. Its SmartSYNC torch reads each single-piece cartridge by RFID for automatic process setup, and the package adds a 25 ft work clamp, two 85 A drag cartridges and one 65 A drag cartridge.
This power source has no CPC port for automated hookup, so the package is set up for handheld plasma cutting and gouging. Each SmartSYNC torch picks up the RFID data on its single-piece cartridge and passes it to the power source, which sets up the process automatically. A sensor in the torch cap checks that the cartridge is seated properly, LEDs on the handle show when the system is ready, and a seven-step amperage LED offers seven presets. A torch lock switch lets the operator swap consumables while the power supply stays on, and a safety trigger guards against accidental starts.
The power source weighs 67 lbs and measures 19.7 x 9.2 x 17.9 in. (L x W x H). Travel speed is 20 ipm on 1 in. metal, and the recommended air supply is 85 psi (5.9 bar) at 400 scfh (6.7 scfm). The color-coded cartridges come in hand, gouging, mechanized/stand-off and FlushCut/HyAccess types, and consumable life data is tracked. Both the torch and the power source detect a worn-out cartridge, which then stays flagged as spent and cannot be used again.
Highlights
Cuts and gouges up to 25 mm (1 in.); 20 ipm travel speed on 1 in. metal
75° SmartSYNC hand torch with 25 ft lead and 25 ft work clamp
No CPC port; 200-600 V single- or three-phase input
Two 85 A drag cartridges and one 65 A drag cartridge supplied
Power source weighs 67 lbs; 19.7 x 9.2 x 17.9 in. (L x W x H)
Color-coded single-piece cartridges with RFID consumable life tracking
Specifications
Brand | Hypertherm |
Manufacturer part number | 087183 |
Processes | Air plasma cutting and gouging |
Cut capacity | Up to 25 mm (1 in.) |
Input power | 200-600 V, 1- or 3-phase, 50-60 Hz |
Travel speed | 20 ipm on 1 in. metal |
Recommended air pressure | 85 psi (5.9 bar); 400 scfh (6.7 scfm) |
Dimensions | 19.7 x 9.2 x 17.9 in. (L x W x H) |
Power source weight | 67 lbs |
Torch | 75° SmartSYNC hand torch, 25 ft lead |
Work clamp | 25 ft |
CPC port | Not included |
Cartridges | 85 A drag (2); 65 A drag (1) |
What's in the box
Powermax85 SYNC power source
75° SmartSYNC torch with 25 ft lead and 25 ft work clamp
85 A drag cartridges (2)
65 A drag cartridge (1)
Operator and safety manuals
Good to know
Check the input power (voltage, phase and amperage) against your supply before you order.