Hypertherm Powermax85 SYNC Plasma Cutter, 50 ft Machine Torch, CPC Port, 087190
The Hypertherm Powermax85 SYNC plasma cutter in this mechanized package pairs the CPC-port power source with a 180° SmartSYNC machine torch on a 50 ft lead and a 50 ft work clamp. It cuts and gouges up to 1 in. (25 mm) on 200-600 V single- or three-phase power, with two 85 A mechanized cartridges and one 30-45 A FineCut mechanized cartridge supplied.
The 180° machine torch is built for mechanized plasma cutting. Like every SmartSYNC torch, it picks up the RFID data on its single-piece cartridge and passes it to the power source, which sets up the process automatically. A sensor in the torch cap checks that the cartridge is seated properly, and both the torch and the power source detect a worn-out cartridge, which then stays flagged as spent and cannot be used again. Color-coded cartridges come in hand, gouging, mechanized/stand-off and FlushCut/HyAccess types, with consumable life data tracking.
Input is 200-600 V, single- or three-phase, at 50-60 Hz. The power source weighs 67 lbs and measures 19.7 x 9.2 x 17.9 in. (L x W x H). Travel speed is 20 ipm on 1 in. metal, and the recommended air supply is 85 psi (5.9 bar) at 400 scfh (6.7 scfm). End-of-life detection switches off when a Fine Cut hand cartridge is fitted, when amperage is set below 40 A, or when output is below 55 A without cartridge communication.
Highlights
Cuts and gouges up to 25 mm (1 in.); 20 ipm travel speed on 1 in. metal
180° SmartSYNC torch with 50 ft lead and 50 ft work clamp
Power source with CPC port; 200-600 V single- or three-phase input
Two 85 A mechanized cartridges and one 30-45 A FineCut mechanized cartridge supplied
Power source weighs 67 lbs; 19.7 x 9.2 x 17.9 in. (L x W x H)
Color-coded single-piece cartridges with RFID consumable life tracking
Specifications
Brand | Hypertherm |
Manufacturer part number | 087190 |
Processes | Air plasma cutting and gouging |
Cut capacity | Up to 25 mm (1 in.) |
Input power | 200-600 V, 1- or 3-phase, 50-60 Hz |
Travel speed | 20 ipm on 1 in. metal |
Recommended air pressure | 85 psi (5.9 bar); 400 scfh (6.7 scfm) |
Dimensions | 19.7 x 9.2 x 17.9 in. (L x W x H) |
Power source weight | 67 lbs |
Torch | 180° SmartSYNC torch, 50 ft lead |
Work clamp | 50 ft |
CPC port | Included |
Cartridges | Single-piece, color-coded: hand, mechanized/stand-off, gouging, FlushCut/HyAccess |
What's in the box
Powermax85 SYNC power source with CPC port
180° SmartSYNC torch with 50 ft lead and 50 ft work clamp
85 A mechanized cartridges (2)
30-45 A FineCut mechanized cartridge (1)
Operator and safety manuals
Good to know
Check the input power (voltage, phase and amperage) against your supply before you order.