Hypertherm Powermax30 AIR Plasma Cutter with 15 ft Hand Torch

The Powermax30 AIR is a compact 30 A plasma cutter that carries its own compressor, so no outside air compressor or filter has to be set up. It runs on 120-240 V single-phase power, weighs 29.8 lbs with its torch, and comes as a hand-torch system with a 75° torch on a 15 ft lead.

A 240 V/20 A plug is supplied with adapters for 120 V/15 A and 240 V/20 A circuits, and a 15 ft work clamp is included. Duty cycle is rated 35% on 240 V and 20% on 120 V, with output adjustable from 15 to 30 A. An engine drive needs to supply 5.5 kW for the full 30 A output.

The unit measures 16.5 x 7.7 x 13.1 in. (D x W x H) and has a 10 ft input power cable. It runs from a single-phase supply, and a carrying strap is included.

Highlights

• Built-in compressor, so no outside air compressor or filter is required

• Runs on 120-240 V single-phase power, 50/60 Hz

• 15-30 A output; 35% duty cycle on 240 V, 20% on 120 V

• 29.8 lbs with torch; 16.5 x 7.7 x 13.1 in. (D x W x H)

• 75° hand torch with 15 ft lead and 15 ft work clamp

• 5.5 kW engine drive requirement for full 30 A output

Specifications

What's in the box

• Power supply

• Air T30 hand torch with 15 ft lead and 15 ft work clamp

• 240 V / 20 A plug with adapters for 120 V / 15 A and 240 V / 20 A circuits

• 1 nozzle and 1 electrode

• Carrying strap

• Operator and safety manuals

Good to know

• Check the input power (voltage, phase and amperage) against your supply before you order.