Hypertherm Powermax45 SYNC Plasma Cutter, 25 ft Machine Torch, CPC Port, 088580

The Hypertherm Powermax45 SYNC plasma cutter machine system pairs a 180° machine torch on a 25 ft lead with a CPC communication port for mechanized cutting. Its single-piece cartridges and RFID torch communication set up the process automatically, and the 230 V CSA unit delivers 9-45 A with a 5/8 in. (16 mm) recommended cut.

Input is 200-240 V single-phase at 50-60 Hz, drawing 39/32 A at 200-230 V, and a motor generator needs 12.5 kVA or 10 kW for the full arc. Recommended cutting is 5/8 in. (16 mm) at 20 ipm, hand-cutting severance is 1-1/8 in. (29 mm) at 5 ipm, and the system cuts aluminum, mild steel and stainless steel. It has a CPC communication interface port and divided arc voltage ratios of 20:1, 21.1:1, 30:1, 40:1 and 50:1.

Laser-marked, color-coded cartridges are easy to tell apart by process, the system detects end-of-life cartridges, and cartridge usage data helps with inventory control. The power supply is an IGBT inverter with a 275 VDC open circuit voltage, an IP23S rating and a 10 ft (3 m) power cable, and it measures 17.4 x 6.8 x 14.0 in. with handle. Platforms span automated, robotic, XY, pipe-and-tube and handheld cutting, and this version has no remote pendant.

Highlights

• Recommended cut 5/8 in. (16 mm); hand-cutting severance 1-1/8 in. (29 mm)

• 9-45 A output on 200-240 V single-phase, 50/60 Hz input

• 25 ft 180° mechanized torch with a CPC port

• CPC communication port; divided arc voltage ratios 20:1 to 50:1

• Platforms: automated, handheld, pipe-and-tube, robotic and XY cutting

• No remote pendant; IP23S rating

Specifications

Good to know

• Check the input power (voltage, phase and amperage) against your supply before you order.