top of page
Lincoln Electric FlexCut 35 Air Plasma Cutter, 12.5 ft Hand Torch, 120/240V
Lincoln Electric FlexCut 35 Air Plasma Cutter, 12.5 ft Hand Torch, 120/240V
Lincoln Electric FlexCut 35 Air Plasma Cutter, 12.5 ft Hand Torch, 120/240V
Lincoln Electric FlexCut 35 Air Plasma Cutter, 12.5 ft Hand Torch, 120/240V
Lincoln Electric FlexCut 35 Air Plasma Cutter, 12.5 ft Hand Torch, 120/240V
Lincoln Electric FlexCut 35 Air Plasma Cutter, 12.5 ft Hand Torch, 120/240V
Lincoln Electric FlexCut 35 Air Plasma Cutter, 12.5 ft Hand Torch, 120/240V
Lincoln Electric FlexCut 35 Air Plasma Cutter, 12.5 ft Hand Torch, 120/240V
Lincoln Electric FlexCut 35 Air Plasma Cutter, 12.5 ft Hand Torch, 120/240V
SKU: K5822-H

Lincoln Electric FlexCut 35 Air Plasma Cutter, 12.5 ft Hand Torch, 120/240V

$1,367.50Price
Quantity

This Lincoln Electric FlexCut 35 Air plasma cutter comes as a Handheld Ready-Pak with a 12.5 ft FlexCut PRO 35 Air hand torch, and its built-in air compressor lets it cut without shop air. The portable 35 A unit runs on 120/240 V single-phase power, cuts mild steel to 3/8 in. maximum, weighs 35 lb and is rated IP23S.

Output adjusts from 15 to 35 A, and a 30 A circuit breaker is recommended. On mild steel the recommended cut is 1/4 in. at 20 ipm, the maximum 3/8 in. at 10 ipm and severance 1/2 in. at 5 ipm, and it also cuts stainless and aluminum. Processes are plasma cutting and grid cutting, an engine drive needs about 5.5 kW of auxiliary power for the full 35 A, and external air at 90-130 psi can be connected when available.

A bright LCD with a central knob shows amperage, process, air source, gas purge and advanced settings, and in guided mode it suggests an amperage range from the material type and thickness entered. Consumables snap in without tools on a threadless electrode connection. The Ready-Pak adds an air filter, a work clamp and cable, an input power cord, a 120 V input adapter, a shoulder strap and a starter kit for 35 A drag cutting, and typical uses are on-site maintenance, small construction sites, HVAC duct installation, demolition and rental fleets.

Highlights

  • 35 A output, adjustable from 15 to 35 A

  • Built-in air compressor, with optional external air at 90-130 PSI

  • Mild steel: 1/4 in recommended, 3/8 in maximum, 1/2 in severance

  • Plasma cutting and grid cutting with a 12.5 ft handheld torch

  • Dual-voltage input: 120/240 V single-phase, 50/60 Hz

  • 35 lb (15.9 kg) with IP23S rating, carry handle and shoulder strap

Specifications

Brand

Lincoln Electric

Manufacturer part number

K5822-H

Processes

Plasma cutting, grid cutting

Input power

120/240 V, single-phase, 50/60 Hz

Output range

15-35 A

Recommended cut (mild steel)

1/4 in at 20 ipm

Maximum cut (mild steel)

3/8 in at 10 ipm

Severance cut (mild steel)

1/2 in at 5 ipm

Recommended circuit breaker

30 A

External gas pressure (optional)

90-130 PSI

Engine-drive auxiliary power

Approx. 5.5 kW for full 35 A output

Torch

FlexCut PRO 35 Air handheld torch, 12.5 ft cable

Dimensions (H x W x D)

18.4 x 8.1 x 14.1 in (468 x 205 x 359 mm)

Net weight

35 lb (15.9 kg)

Protection rating

IP23S

What's in the box

  • FlexCut 35 Air plasma cutter power source with built-in compressor

  • FlexCut PRO 35 Air handheld torch, 12.5 ft cable (KP5848-12-5)

  • Air filter (KP5843-1)

  • Work clamp and cable (KP6035-1)

  • Input power cord

  • 120 V input adapter (KP6034-1)

  • Shoulder strap (KP6012-1)

  • Consumable starter kit for 35 A drag cutting

Good to know

  • Check the input power (voltage, phase and amperage) against your supply before you order.

    bottom of page