Lincoln Electric Flextec 350X PowerConnect Multiprocess Welder, DLF-82 Ready-Pak

The Lincoln Electric Flextec 350X PowerConnect / DLF-82 Ready-Pak, a 350 A pulsed MIG welding system for fabrication shops, keeps true multiprocess support. The PowerConnect power source and DLF-82 wire feeder come fully assembled on an inverter and feeder cart, accept single- or three-phase input from 200 to 600 V, and need only power, wire and shielding gas.

Synergic weld modes reduce setup to one knob: the operator chooses the weld process, wire type and diameter and gas, then sets wire feed speed higher for thicker material or lower for thinner, and the voltage adjusts automatically. Pulsed MIG support brings lower spatter, better puddle control and a more forgiving MIG process.

The Tweco-configured PowerConnect power source also runs stick, TIG, MIG, flux-cored and gouging, with CrossLinc for adjustment at the arc without control cables, an IP23 enclosure and a Desert Duty rating up to 131°F (55°C). Typical uses include pipeline and pipe welding, construction and field work, structural steel fabrication and shipbuilding.

Highlights

• 350 A pulsed MIG system for fabrication shops

• Flextec 350X PowerConnect power source with a DLF-82 wire feeder

• Fully assembled, with an inverter and wire feeder cart

• Synergic weld modes with one-knob control; voltage adjusts automatically

• Pulsed MIG for lower spatter and better puddle control

• 200-600 V single- or three-phase input; Tweco configuration

Specifications

What's in the box

• Flextec 350X PowerConnect power source

• DLF-82 wire feeder

• Assembled inverter and wire feeder cart

Good to know

• Check the input power (voltage, phase and amperage) against your supply before you order.