top of page
Lincoln Electric Tomahawk 1500 Plasma Cutter, 100A, 50 ft Hand Torch, K3477-2
SKU: K3477-2

Lincoln Electric Tomahawk 1500 Plasma Cutter, 100A, 50 ft Hand Torch, K3477-2

$4,561.69Price
Quantity

The Lincoln Electric Tomahawk 1500 plasma cutter One-Pak comes ready to cut with an LC105 hand torch on a 50 ft (15 m) lead and a consumable starter kit. This 100 A constant-current inverter takes 200-575 V single- or three-phase input, cuts hand-held up to 1-1/4 in. (31.8 mm) and severs up to 1-1/2 in. (38.1 mm) at maximum output.

On three-phase power the rated outputs are 60 A at 140 V and 100% duty cycle, 80 A at 80% and 100 A at 60%, with a 25-100 A output range. Single-phase 230 V input gives 60 A at 100% and 80 A at 80%, and 200-208 V single-phase gives 60 A at 100%, both with a 25-80 A range. Air pressure should be 87 to 109 psi (6.0-7.5 bar).

Arc starts need no high frequency, which helps consumable life, and Parts-in-Place holds off cutting or gouging until the consumables are installed. An air regulator, pressure gauge and internal water separator are standard, the ergonomic LC105 torch resists heavy impacts, and the IP23 rating covers indoor and outdoor use. Grid cutting is supported, a compatible engine drive can power the machine on remote jobs, and it measures 17.9 x 11.8 x 25.4 in. (H x W x D).

Highlights

  • 100 A at 140 V, 60% duty cycle; 60 A at 140 V, 100% duty cycle

  • 200-575 V single-phase or 3-phase input, 50/60 Hz

  • Hand-held cuts up to 1-1/4 in. (31.8 mm); severance to 1-1/2 in. (38.1 mm)

  • LC105 hand torch with 50 ft (15 m) lead (K2849-2)

  • Touch-start arc without high frequency; Parts-in-Place control

  • IP23 rating; air regulator, pressure gauge and water separator built in

Specifications

Brand

Lincoln Electric

Manufacturer part number

K3477-2

Processes

Plasma cutting, gouging, grid-cutting

Input power

200-208/230/380/460/575 V, 1- or 3-phase, 50/60 Hz

Rated output (3-phase)

60 A / 140 V / 100% | 80 A / 140 V / 80% | 100 A / 140 V / 60%

Rated output (1-phase, 230 V)

60 A / 140 V / 100% | 80 A / 140 V / 80%

Rated output (1-phase, 200-208 V)

60 A / 140 V / 100%

Output range

25-100 A (3-phase), 25-80 A (1-phase)

Gas pressure required

87 to 109 PSI (6.0-7.5 bar)

Hand-held cut capacity

Up to 1-1/4 in. (31.8 mm)

Severance cut

Up to 1-1/2 in. (38.1 mm)

Torch

LC105 hand torch, 50 ft (15 m) lead (K2849-2)

Enclosure rating

IP23

Dimensions (H x W x D)

17.9 x 11.8 x 25.4 in (455 x 301 x 645 mm)

What's in the box

  • LC105 torch, 50 ft (15 m) lead (K2849-2), with cable, electrode, nozzle 100A, swirl ring, retaining cap (contact) and drag shield cap 100A

  • Air regulator and pressure gauge

  • Internal water separator

  • Work clamp and 25 ft (7.5 m) cable

  • Input power cord

  • Consumable starter kit for LC105 torch (KP4141-20): 2 electrodes, 2 nozzles 100A, 1 swirl ring

Good to know

  • Check the input power (voltage, phase and amperage) against your supply before you order.

    bottom of page