Lincoln Electric Power MIG 215 MPi Multiprocess Welder with TIG One-Pak
This TIG One-Pak from Lincoln Electric builds on the Power MIG 215 MPi dual-voltage multiprocess welder, which runs on 120 V or 230 V and covers MIG, flux-cored, stick and DC TIG, and adds included TIG accessories for immediate TIG welding. It targets general fabrication, small contractor operations and repair.
The power source reaches 220 A on 230 V and 140 A on 120 V, with MIG rated at 215 A, 24.8 V and 30% on 230 V. Its Ready.Set.Weld system recommends wire feed speed and voltage from the material type and thickness, and the ArcFX display shows the recommendations.
TIG readiness is built in through a TIG solenoid and a foot pedal adapter, and the TIG accessories in this One-Pak make TIG welding possible from the start. The case has lift points for moving the unit around the shop, and the wire drive feeds consistently across wire types and diameters.
Highlights
TIG One-Pak built on the Power MIG 215 MPi dual-voltage welder
Dual input voltage: 120 V and 230 V, single-phase, 60 Hz
Output range up to 220 A on 230 V and up to 140 A on 120 V
Included TIG accessories for immediate TIG welding
TIG-ready: solenoid and foot pedal adapter are built into the unit
Ready.Set.Weld setup and ArcFX display
Specifications
Brand | Lincoln Electric |
Manufacturer part number | K4878-1 |
Processes | MIG (GMAW), flux-cored (FCAW-S, FCAW-G), stick (SMAW), DC TIG (GTAW) |
Input voltage | 120 V or 230 V, single-phase, 60 Hz (switch-selectable) |
Output range | 20-140 A DC (120 V); 20-220 A DC (230 V) |
Rated output, MIG | 105 A / 19.3 V / 40% (120 V); 215 A / 24.8 V / 30% (230 V) |
Rated output, stick | 85 A / 23.4 V / 40% (120 V); 175 A / 27 V / 30% and 110 A / 24.4 V / 100% (230 V) |
Rated output, TIG | 130 A / 15.2 V / 40% (120 V); 175 A / 17 V / 30% and 110 A / 14.4 V / 100% (230 V) |
Max open circuit voltage | 56 V |
Polarity | DC (DCEP / DCEN selectable) |
Wire feed speed | 50-500 ipm (1.3-12.7 m/min) |
Wire diameter | 0.025-0.045 in. (0.6-1.1 mm) |
IEC rating | IP21S |
TIG readiness | Built-in TIG solenoid and foot pedal adapter |
Good to know
Check the input power (voltage, phase and amperage) against your supply before you order.