Lincoln Electric Ranger 330MP Gas Welder Generator, 330A, 10,000W, Rehlko EFI

The Lincoln Electric Ranger 330MP is a gas welder generator and the highest-output gasoline model in the Ranger MP family, with up to 330 A for stick, MIG and flux-cored work and carbon arc gouging, all set from a single knob. A 26.5 hp Rehlko ECH749 engine with electronic fuel injection supplies 11,500 W peak and 10,000 W continuous 120/240 V single-phase AC power.

Electronic fuel injection and an electronic throttle body help this engine-driven welder start in the cold, hold a steady arc and save fuel in extreme temperatures and at high elevations. Output spans 35-330 A and 15-30 V, digital LED meters display both preset and measured amps and volts, and stick mode gouges with carbon electrodes up to 1/4 in. A remote switch and 6-pin connection take the optional K857 (25 ft) and K857-1 (100 ft) output controls.

Generator power, available while welding, has under 5% total harmonic distortion for sensitive electronics and feeds four 120 V receptacles and one 240 V receptacle, with GFCI-protected receptacles in the design. Auto-Idle trims noise and fuel consumption when demand falls. The 426 lb welder/generator has an 11 gal tank, front battery access and an IP23S-rated galvanized steel enclosure, and its engine comes factory-filled with 300-hour premium oil.

Highlights

• Stick, MIG and flux-cored welding to 330 A, plus carbon arc gouging; range 35-330 A and 15-30 V

• Rehlko ECH749 engine, 26.5 hp, with electronic fuel injection and an electronic throttle body

• 11,500 W peak and 10,000 W continuous 120/240 V single-phase AC power

• Digital LED meters for preset and actual amps and volts

• Under 5% total harmonic distortion; weld and run generator power at the same time

• 426 lbs; 26.4 in. H x 20 in. W x 36.4 in. L; 11 gal fuel tank

Specifications

Good to know

• Engine-driven equipment gives off carbon monoxide: run it outdoors only, away from doors, windows and vents.