Miller Bobcat 230 3-Phase Gas Welder Generator, Kohler, 230A, 8,500W, 907842

The Miller Bobcat 230 3-Phase is a gas welder generator rated 230 A at a 100% duty cycle for stick, MIG and flux-cored welding. Three-phase and single-phase auxiliary outputs are each 8,500 W continuous and 10,000 W peak, and Miller points to 480-volt three-phase pivot irrigation systems among its farm, ranch and maintenance uses.

This engine-driven welder is rated 230 A at 29.2 V for CC/DC stick (SMAW) and 230 A at 25.5 V for CV/DC MIG (GMAW) and flux-cored welding (FCAW), both at a 100% duty cycle, across a 20-230 A range on steel and stainless steel. Full auxiliary power is available at any weld setting, GFCI protection is included, and arcs start easily with less spatter.

A 23.5 hp Kohler gasoline engine idles at 2300 RPM, welds at 3600 RPM and draws from an 11 gallon tank. The welder/generator weighs over 100 pounds less than previous models and is 13 percent smaller, freeing truck space and payload, and a digital interface speeds setup. A lift eye is standard, with running gear or a cart and a trailer optional.

Highlights

• 230 A at a 100% duty cycle: 29.2 V for stick, 25.5 V for MIG/flux-cored

• Stick, MIG and flux-cored welding across a 20-230 A range

• Three-phase auxiliary power: 8,500 W continuous, 10,000 W peak

• Single-phase auxiliary power: 8,500 W continuous, 10,000 W peak

• 23.5 hp Kohler gasoline engine with an 11 gallon tank

• Lift eye standard; running gear/cart and trailer optional

Specifications

Good to know

• Engine-driven equipment gives off carbon monoxide: run it outdoors only, away from doors, windows and vents.