Miller Bobcat 230 Welder Generator, Kohler, Stick/Flux-Cored, 11,000W Peak

The Miller Bobcat 230 Kohler is a single-knob welder generator for stick and flux-cored welding, with an optional wire feeder adding MIG (GMAW). Auxiliary power stays at full output without interfering with the arc, generator power is rated at 11,000 W of usable peak for at least 30 seconds, and the machine suits maintenance and repair, construction and farm or ranch work.

Setup runs through a single-knob interface, and Miller says 7018 and 6010 stick electrodes strike easily with less spatter. Jobsite tools can run while welding because auxiliary power does not affect the arc, and optional Spectrum systems add plasma cutting and gouging. Generator power also serves stand-alone backup or truck auxiliary setups.

Miller's Accu-Rated peak of 11,000 W stays usable for at least 30 seconds, aimed at air plasma cutting, motor starting and heavy auxiliary loads. Copper windings and reversed generator airflow keep this engine-driven welder cooler and quieter, and a skewed-rotor design smooths generator power. A maintenance display flags service needs, access panels need no tools, and fuel fill and the oil drain/filter sit on one side.

Highlights

• Single-knob adjustment interface for machine setup

• Stick and flux-cored welding; wire feeder upgrade adds GMAW

• 11,000 W of usable peak power for at least 30 seconds (Accu-Rated)

• Auxiliary power at full output with no interference at the arc; optional Spectrum plasma cutting

• Weighs over 100 pounds less than previous models and is 13% smaller

• Toolless access panels; fuel fill and oil drain/filter on one side

Specifications

Good to know

• Engine-driven equipment gives off carbon monoxide: run it outdoors only, away from doors, windows and vents.

• WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.