top of page
Miller Deltaweld 500 MIGRunner MIG Welder, Single Intellx Feeder, 230/460V
Miller Deltaweld 500 MIGRunner MIG Welder, Single Intellx Feeder, 230/460V
Miller Deltaweld 500 MIGRunner MIG Welder, Single Intellx Feeder, 230/460V
Miller Deltaweld 500 MIGRunner MIG Welder, Single Intellx Feeder, 230/460V
Miller Deltaweld 500 MIGRunner MIG Welder, Single Intellx Feeder, 230/460V
SKU: 951814001

Miller Deltaweld 500 MIGRunner MIG Welder, Single Intellx Feeder, 230/460V

$10,087.70Price
Quantity

The Miller Deltaweld 500 MIGRunner is a complete three-phase MIG welder package built on the Deltaweld 500 power source (907785) with ArcConnect, Accu-Pulse and digital meters. It adds a single-wire Intellx feeder with a 15 ft Bernard gun and running gear with a dual cylinder rack, runs on 230/460 V input and delivers up to 650 A at 10-44 V.

Accu-Pulse gives precise control of the pulse arc and the molten puddle, and in many applications it can raise wire feed speed and deposition by 20 to 25 percent. ArcConnect's high-speed signals improve weld performance and put the point-of-use controls at the feeder, so this power source has no 14-pin receptacle and links to the feeder with the included 9 ft ArcConnect cable. Auxiliary power is standard, and a dedicated CC gouge mode handles carbon arc gouging with carbons up to 3/8 in.

This package uses the standard Intellx feeder rather than the Pro. It has arc control for fine tuning, a digital display, remote voltage, a jog/purge button, a rotatable drive assembly and balanced-pressure drive rolls with tensioners, and it feeds .023 to 5/64 in. wire at 50-780 IPM from spools up to 18 in. and 60 lbs. The feeder weighs 44.8 lbs, and the package also includes a gas hose and flowmeter regulator, lugged 4/0 weld cable and a work cable with 600 A C-clamp.

Highlights

  • Deltaweld 500 power source (907785): output up to 650 A at 10-44 V

  • 230/460 V input, three-phase only

  • Single-wire standard Intellx feeder (not the Pro) with 15 ft Bernard gun

  • Running gear with dual cylinder rack; 9 ft ArcConnect cable

  • CC gouge mode for carbons up to 3/8-inch, plus digital meters and auxiliary power

  • Feeder: 50-780 IPM, .023-5/64 in. wire, spools up to 18 in. and 60 lbs

Specifications

Brand

Miller

Manufacturer part number

951814001

Input power

230/460 V, 3-phase only

Maximum output

650 A

Voltage range

10-44 V

Technologies

Accu-Pulse, ArcConnect, EZ-Set parameters

Power source

Deltaweld 500 (907785), digital meters, auxiliary power

Gouge mode

Dedicated CC gouge, carbons up to 3/8 in.

Feeder

Single-wire Intellx, standard (not Pro)

MIG gun

15 ft Bernard

Wire feed speed

50-780 IPM

Wire diameter

.023-5/64 in.

Max spool size

18 in. / 60 lbs

Control link

9 ft ArcConnect cable (no 14-pin receptacle)

Feeder weight

44.8 lbs

Feeder dimensions

16.25 in. H x 12.38 in. W x 27.88 in. L

What's in the box

  • Deltaweld 500 power source (907785)

  • Single-wire Intellx feeder with 15 ft Bernard gun

  • Running gear with dual cylinder rack

  • Flowmeter regulator with gas hose

  • 4/0 weld cable with lugs

  • Work cable with 600 A C-clamp

  • 9 ft ArcConnect cable

  • .035/.045 V-groove drive rolls

  • Spare Bernard Centerfire contact tips

Good to know

  • Check the input power (voltage, phase and amperage) against your supply before you order.

    bottom of page