Miller Dynasty 210 AC/DC TIG/Stick Welder with CPS, 120-480V, 907816001

The Miller Dynasty 210 with CPS is an AC/DC TIG/stick inverter welder with a built-in 120 V receptacle dedicated to the Coolmate 1.3 cooler. Auto-Line input accepts single- or three-phase power from 120 to 480 V, output covers 1-210 A, and the 50 lb unit welds steel from 0.002 in. and aluminum from 0.012 in. up to 1/4 in. thick.

Its cooler power supply (CPS) is an integrated 120-volt outlet set aside for the Coolmate 1.3, and Cooler-On-Demand runs the auxiliary cooling system only when it is needed. Setup is guided by an LCD with on-screen explanations and images, program memory saves weld programs, Pro-Set offers preset balance, frequency, pulse and DIG values, and Locks and Limits holds parameters within the welding procedure specification (WPS).

A USB port loads software updates, backs up settings and moves programs between units, while QuietPulse softens the DC pulse waveform to cut noise. Stick (SMAW) gets DIG arc control, adjustable from a smooth 7018 arc to a stiffer 6010 arc, plus adaptive Hot Start against sticking. Included are the power source with CPS, a 2.4 m primary cord, an adjustable shoulder strap and two 50 mm Dinse-style connectors, and a running gear/cart is optional. Typical industries include aerospace, shipbuilding, railcar, racing, and farm and ranch.

Highlights

• Integrated 120 V receptacle (CPS) for the Coolmate 1.3 cooler

• Amperage range 1-210 A; 80 VDC maximum open-circuit voltage

• Auto-Line input: 1- and 3-phase, 120-480 V, 50/60 Hz

• Aluminum from 0.012 in. and steel from 0.002 in., both up to 1/4 in. thick

• Pro-Set, Locks and Limits, QuietPulse and a USB port

• 50 lbs, with handle and shoulder strap

Specifications

What's in the box

• Dynasty 210 power source with CPS

• Primary cord, 2.4 m

• Adjustable shoulder strap

• Two 50 mm Dinse-style connectors

Good to know

• Check the input power (voltage, phase and amperage) against your supply before you order.