Miller Dynasty 300 CV Multiprocess Welder with CPS, AC/DC TIG, 208-600V, 907819

The Miller Dynasty 300 CV multiprocess welder with CPS is a 55 lb machine for AC/DC TIG, pulsed TIG, stick and air carbon arc, and its CV output allows MIG when it is paired with a suitcase feeder such as an ArcReach 8 or 12 (feeder not included). Auto-Line input accepts 208-600 V, single- or three-phase.

Output spans 2-300 A on AC and 1-300 A on DC, AC TIG covers material from 0.012 to 3/8 in. thick, and stick capacity reaches 1/4 in. 6010, 7/32 in. 7018 and 3/16 in. 7024 electrodes. Blue-Lightning high-frequency arc starts, pulse, Pro-Set parameters and digital meters support TIG (GTAW) work, and the generator requirement is 12.5 kW.

The Cooler Power Supply (CPS) adds a 120 V receptacle for a cooler, and cooler-on-demand and fan-on-demand run cooling only when needed, alongside Wind Tunnel Technology and a power-saving sleep timer. Software updates load through the USB port, and the package includes the Dynasty 300 power source, two 50mm Dinse connectors, an 8 ft power cord without plug and the user manual.

Highlights

• AC/DC TIG, pulsed TIG, stick and air carbon arc; MIG with a paired suitcase feeder

• 2-300 A on AC and 1-300 A on DC

• Auto-Line input for 208-600 V, 1 or 3 phase

• Weighs 55 lbs; stick electrodes up to 1/4 in 6010, 7/32 in 7018 and 3/16 in 7024

• Blue-Lightning high-frequency arc start; software updates through USB

• 120 V Cooler Power Supply (CPS) receptacle; cooler-on-demand

Specifications

What's in the box

• Dynasty 300 power source

• Two 50mm Dinse connectors

• 8 ft power cord (no plug)

• User manual

Good to know

• Check the input power (voltage, phase and amperage) against your supply before you order.