top of page
Miller Millermatic 355 Pulsed MIG Welder with Running Gear, 20-400A, 951926
Miller Millermatic 355 Pulsed MIG Welder with Running Gear, 20-400A, 951926
Miller Millermatic 355 Pulsed MIG Welder with Running Gear, 20-400A, 951926
SKU: 951926

Miller Millermatic 355 Pulsed MIG Welder with Running Gear, 20-400A, 951926

$6,144.95Price
Quantity

The Miller Millermatic 355 Pulsed MIG Welding Package with Running Gear pairs the 355 power source with running gear for moving the welder around the shop. It handles MIG, flux-cored and pulsed MIG welding on single- or three-phase 208, 240, 460 or 575 V input, is rated 310 A at 29.5 V with a 60% duty cycle, and welds aluminum, stainless and mild steel up to 1/2 in. thick.

Output covers 20-400 A with 90 VDC maximum open-circuit voltage and 50-800 IPM (1.3-20 m/min) wire feed speed, and the input voltage selection switch sits in the wire drive compartment, with an error shown if the wrong input is selected. The 7-inch color LCD brings Auto-Set Elite, an electronic parameter chart and program mode, and Trigger Program Select changes programs with a tap of the gun trigger. Locks and Limits keep parameters within the welding procedure specification (WPS), and a USB port updates software and transfers programs.

Running gear is optional on the base Millermatic 355, and this package includes it along with a 9 ft (2.7 m) industrial power cord, a 300-amp, 15 ft (4.5 m) Bernard BTB MIG gun fitted with AccuLock S consumables, a work cable and clamp with a 50 mm Dinse-style connector, a flow gauge regulator and gas hose, reversible drive rolls, extra contact tips and a material thickness gauge. The welder feeds steel, stainless, flux-cored, metal-core, aluminum and silicon bronze wire and reaches full output on generators of 19,000 watts or more.

Highlights

  • Package includes running gear

  • Rated 310 A at 29.5 V, 60% duty cycle; 20-400 A amperage range

  • Manual input voltage switch for 208, 240, 460 or 575 V, single- or three-phase

  • MIG, pulsed MIG (GMAW-P) and flux-cored; aluminum, stainless and mild steel up to 1/2 in. thick

  • 7-inch color LCD with Auto-Set, electronic parameter chart and Trigger Program Select

  • USB port for software updates, settings backups and program transfers

Specifications

Brand

Miller

Manufacturer part number

951926

Processes

MIG (GMAW), pulsed MIG (GMAW-P), flux-cored

Input voltage

208, 240, 460, 575 V; 1- and 3-phase

Rated output

310 A at 29.5 V, 60% duty cycle

Amperage range

20-400 A

Max open-circuit voltage

90 VDC

Wire feed speed

50-800 IPM (1.3-20 m/min)

Wire diameter

Aluminum .035-.047 in.; metal-core .045-.052 in.; stainless .023-.045 in.; solid steel and flux-cored .035-.045 in.; silicon bronze .030-.035 in.

Spool size

12 in. (305 mm)

Material thickness

Mild steel 22 ga. (0.6 mm) to 1/2 in. (12.7 mm); aluminum 18 ga. (1.2 mm) to 1/2 in. (12.7 mm)

Weldable metals

Steel, stainless steel, aluminum, specialty metals

Generator

Full output at 19,000 W (19K) or higher

Weight

99 lbs

Dimensions

26.25 x 13.75 x 19.25 in. (L x W x H)

Running gear

Included in this package

What's in the box

  • Millermatic 355 power source with 9 ft (2.7 m) industrial power cord

  • 15 ft (4.5 m) 300-amp Bernard BTB MIG gun with Bernard AccuLock S consumables for .035/.045 in. (0.9/1.2 mm) wire

  • 10 ft (3 m) work cable with clamp and 50 mm Dinse-style connector

  • Flow gauge regulator and gas hose for argon or AR/CO2 mix

  • .035/.045 in. (0.9/1.2 mm) reversible drive rolls

  • Extra .035 and .045 in. (0.9 and 1.2 mm) contact tips

  • Material thickness gauge

  • Running gear

Good to know

  • Check the input power (voltage, phase and amperage) against your supply before you order.

    bottom of page