top of page
Miller Millermatic 355 Pulsed MIG Welder with XR-A Aluma-Pro Gun, 20-400A
Miller Millermatic 355 Pulsed MIG Welder with XR-A Aluma-Pro Gun, 20-400A
Miller Millermatic 355 Pulsed MIG Welder with XR-A Aluma-Pro Gun, 20-400A
SKU: 951927

Miller Millermatic 355 Pulsed MIG Welder with XR-A Aluma-Pro Gun, 20-400A

$8,206.74Price
Quantity

The Miller Millermatic 355 Pulsed MIG Welding Package with XR-A Aluma-Pro Gun pairs the 355 power source with an XR-A Aluma-Pro gun. It runs MIG, flux-cored and pulsed MIG welding on single- or three-phase 208, 240, 460 or 575 V input, is rated 310 A at 29.5 V with a 60% duty cycle, and its wire range covers .035-.047 in. aluminum.

Output covers 20-400 A with 90 VDC maximum open-circuit voltage and 50-800 IPM (1.3-20 m/min) wire feed speed, and the input voltage selection switch sits in the wire drive compartment, with an error shown if the wrong input is selected. The 7-inch color LCD brings Auto-Set Elite, an electronic parameter chart and program mode, and Trigger Program Select changes programs with a tap of the gun trigger. Locks and Limits keep parameters within the welding procedure specification (WPS), and a USB port updates software and transfers programs.

This package adds the XR-A Aluma-Pro gun to the base Millermatic 355 kit: a 9 ft (2.7 m) industrial power cord, a 300-amp, 15 ft (4.5 m) Bernard BTB MIG gun fitted with AccuLock S consumables, a work cable and clamp with a 50 mm Dinse-style connector, a flow gauge regulator and gas hose, reversible drive rolls, extra contact tips and a material thickness gauge. The welder handles aluminum, stainless and mild steel up to 1/2 in. thick and reaches full output on generators of 19,000 watts or more.

Highlights

  • Package includes an XR-A Aluma-Pro gun

  • Rated 310 A at 29.5 V, 60% duty cycle; 20-400 A amperage range

  • Manual input voltage switch for 208, 240, 460 or 575 V, single- or three-phase

  • MIG, pulsed MIG (GMAW-P) and flux-cored; aluminum, stainless and mild steel up to 1/2 in. thick

  • 7-inch color LCD with Auto-Set, electronic parameter chart and Trigger Program Select

  • USB port for software updates, settings backups and program transfers

Specifications

Brand

Miller

Manufacturer part number

951927

Processes

MIG (GMAW), pulsed MIG (GMAW-P), flux-cored

Input voltage

208, 240, 460, 575 V; 1- and 3-phase

Rated output

310 A at 29.5 V, 60% duty cycle

Amperage range

20-400 A

Max open-circuit voltage

90 VDC

Wire feed speed

50-800 IPM (1.3-20 m/min)

Wire diameter

Aluminum .035-.047 in.; metal-core .045-.052 in.; stainless .023-.045 in.; solid steel and flux-cored .035-.045 in.; silicon bronze .030-.035 in.

Spool size

12 in. (305 mm)

Material thickness

Mild steel 22 ga. (0.6 mm) to 1/2 in. (12.7 mm); aluminum 18 ga. (1.2 mm) to 1/2 in. (12.7 mm)

Weldable metals

Steel, stainless steel, aluminum, specialty metals

Generator

Full output at 19,000 W (19K) or higher

Weight

99 lbs

Dimensions

26.25 x 13.75 x 19.25 in. (L x W x H)

Portability

Running gear / cart (optional)

What's in the box

  • Millermatic 355 power source with 9 ft (2.7 m) industrial power cord

  • 15 ft (4.5 m) 300-amp Bernard BTB MIG gun with Bernard AccuLock S consumables for .035/.045 in. (0.9/1.2 mm) wire

  • 10 ft (3 m) work cable with clamp and 50 mm Dinse-style connector

  • Flow gauge regulator and gas hose for argon or AR/CO2 mix

  • .035/.045 in. (0.9/1.2 mm) reversible drive rolls

  • Extra .035 and .045 in. (0.9 and 1.2 mm) contact tips

  • Material thickness gauge

  • XR-A Aluma-Pro gun

Good to know

  • Check the input power (voltage, phase and amperage) against your supply before you order.

    bottom of page