Miller Multimatic 220 AC/DC Multiprocess Welder with Dual Cylinder Cart

This Multimatic 220 AC/DC package adds a dual cylinder cart to the MIG, DC stick and AC/DC TIG welder and includes a wired foot control, a TIG torch and a MIG gun. The welder itself weighs 56 pounds and runs on 120 or 240 V input, and 6010 stick capability is standard.

QuickTech determines polarity on its own, keeps a MIG gun and a TIG torch connected together, changes process when the trigger or foot control is pressed, and restores the settings last used. Auto-Set Elite supplies predefined settings for MIG, stick, AC TIG and DC TIG. In the manual TIG and stick modes, Pro-Set provides preset values: AC balance 75%, AC frequency 120 Hz, DC pulse 100 Hz and stick DIG 30%.

TIG settings can be adjusted over a wide range: AC balance 60-80%, AC frequency 60-150 Hz and DC pulse from off to 150 PPS, with Lift-Arc and high-frequency starts. Two shielding gas inputs let MIG gas and TIG gas stay hooked up together, and the standard 14-pin connector takes a foot control, a fingertip control or a wireless foot control.

Highlights

• Dual cylinder cart included with the welder

• MIG, DC stick and AC/DC TIG; 6010 stick capability is standard

• 120 or 240 V input through a tool-free MVP plug; the welder itself weighs 56 pounds

• QuickTech: automatic polarity, process switching and recall of last settings

• AC balance 60-80%, AC frequency 60-150 Hz, DC pulse up to 150 PPS

• Wired RFCS-14 HD foot control (20 ft cord) and 12.5 ft A-150 TIG torch included

Specifications

What's in the box

• Multimatic 220 AC/DC power source

• Dual cylinder cart

• 6.5 ft (2 m) power cord with MVP plugs for 120 V and 240 V

• 10 ft (3 m) MDX 100 MIG gun and cable assembly

• 13 ft (4 m) electrode holder cable with 25 mm Dinse-style connector

• 12.5 ft (3.8 m) Weldcraft A-150 (WP-17) TIG torch with 25 mm Dinse-style connector

• RFCS-14 HD foot control with 20 ft (6 m) cord

• 10 ft (3 m) work cable with clamp and 25 mm Dinse-style connector

• Two flow gauge regulators and gas hoses for argon and Ar/CO2 mix

• Two contact tips for 0.030 in (0.8 mm) wire

• Quick Select drive roll for 0.024 in (0.6 mm) or 0.030/0.035 in (0.8/0.9 mm) solid wire and 0.030/0.035 in (0.8/0.9 mm) flux-cored wire

• AK2C TIG torch accessory kit

• Material thickness gauge

• Hook-and-loop cord wraps

Good to know

• Check the input power (voltage, phase and amperage) against your supply before you order.