top of page
Miller Multimatic 235 Multiprocess Welder with EZ-Latch Running Gear
Miller Multimatic 235 Multiprocess Welder with EZ-Latch Running Gear
Miller Multimatic 235 Multiprocess Welder with EZ-Latch Running Gear
Miller Multimatic 235 Multiprocess Welder with EZ-Latch Running Gear
Miller Multimatic 235 Multiprocess Welder with EZ-Latch Running Gear
SKU: 951846

Miller Multimatic 235 Multiprocess Welder with EZ-Latch Running Gear

$4,366.00Price
Quantity

This Multimatic 235 package places the 63 lb multiprocess welder on EZ-Latch running gear, with latches that secure the machine and release it when it needs to be carried. The welder covers MIG, flux-cored, stick and DC TIG with an amperage range of 20-235 A, and a 4.3-inch color LCD speeds setup.

Latches secure the machine to the running gear and release when the retaining knob is loosened and the latches are rotated, which lets the machine and running gear be loaded into a truck without a lift truck. Rated output is 170 A at 22.5 V (CV, MIG and flux-cored), 150 A at 26 V (CC, stick) and 180 A at 17.2 V (CC, DC TIG), all at 60% duty cycle.

Gun-On-Demand identifies whichever gun is triggered, MIG or spool, and recalls the voltage and wire feed speed stored for it. The MDX-250 gun uses an AccuLock liner that loads from the front and locks at both ends to keep the wire path aligned, and its handle combines a rubber overmold with a ball-and-socket design. Capacity runs from 24 ga. to 3/8 in. mild steel in MIG and TIG and from 18 ga. to 3/8 in. aluminum in MIG.

Highlights

  • EZ-Latch running gear: latches secure the machine and release it for portability

  • Rated at 60% duty cycle: 170 A MIG/flux-cored, 150 A stick, 180 A DC TIG

  • Amperage range 20-235 A; 208 V and 220/230/240 V single-phase input

  • 63 lb machine with a 4.3-inch color LCD and Auto-Set

  • Gun-On-Demand detects and recalls settings for the MIG gun or spool gun

  • 15 ft (4.5 m) 250-amp MDX-250 MIG gun included

Specifications

Brand

Miller

Manufacturer part number

951846

Processes

MIG, flux-cored, stick, DC TIG (Lift Arc and pulsed)

Amperage

20-235 A

Rated output, MIG/flux

170 A at 22.5 V, 60% duty cycle (CV)

Rated output, stick

150 A at 26 V, 60% duty cycle (CC)

Rated output, DC TIG

180 A at 17.2 V, 60% duty cycle (CC)

Input voltage

208 V; 220/230/240 V

Input phase

1-phase, 50/60 Hz

Open-circuit voltage

54 VDC max

Mild steel thickness

24 ga.-3/8 in. (MIG, TIG); 16 ga.-3/8 in. (stick)

Aluminum thickness

18 ga.-3/8 in. (MIG)

Weight

63 lb (machine only)

Display

4.3-inch color LCD

MIG gun

15 ft (4.5 m) 250-amp MDX-250

Running gear

EZ-Latch

What's in the box

  • Multimatic 235 welder with 7 ft (2.1 m) power cord

  • 15 ft (4.5 m) 250-amp MDX-250 MIG gun with Bernard AccuLock MDX consumables for 0.030/0.035 in (0.8/0.9 mm) wire

  • 10 ft (3 m) cable with electrode holder and 50 mm Dinse-style connector

  • 10 ft (3 m) work cable with clamp and 50 mm Dinse-style connector

  • Flow gauge regulator and gas hose for argon or Ar/CO2 mix

  • 0.030/0.035 in (0.8/0.9 mm) reversible drive rolls

  • Extra contact tips

  • Material thickness gauge

  • EZ-Latch running gear

Good to know

  • Check the input power (voltage, phase and amperage) against your supply before you order.

    bottom of page