top of page
Miller Multimatic 255 Multiprocess Welder with Dual Cart and TIG Kit (208-575 V)
Miller Multimatic 255 Multiprocess Welder with Dual Cart and TIG Kit (208-575 V)
Miller Multimatic 255 Multiprocess Welder with Dual Cart and TIG Kit (208-575 V)
Miller Multimatic 255 Multiprocess Welder with Dual Cart and TIG Kit (208-575 V)
Miller Multimatic 255 Multiprocess Welder with Dual Cart and TIG Kit (208-575 V)
Miller Multimatic 255 Multiprocess Welder with Dual Cart and TIG Kit (208-575 V)
Miller Multimatic 255 Multiprocess Welder with Dual Cart and TIG Kit (208-575 V)
Miller Multimatic 255 Multiprocess Welder with Dual Cart and TIG Kit (208-575 V)
Miller Multimatic 255 Multiprocess Welder with Dual Cart and TIG Kit (208-575 V)
SKU: 951768

Miller Multimatic 255 Multiprocess Welder with Dual Cart and TIG Kit (208-575 V)

$6,249.00Price
Quantity

This Multimatic 255 package adds an EZ-Latch dual cylinder cart with an elevated gun and cable holder, plus a TIG kit, to the 84 lb multiprocess welder. The kit brings a 25 ft air-cooled A-150 TIG torch and a 20 ft RFCS-14 foot control, and Auto-Line accepts single-phase input from 208-575 V.

The TIG kit consists of a 25 ft air-cooled A-150 torch, an RFCS-14 foot control with a 20 ft cord, a 10-pin to 14-pin adapter cord, a regulator with 5 ft gas hose and an AK1C torch accessory kit. The cart is an EZ-Latch dual cylinder design with an elevated rack that holds the gun and cables.

The welder runs MIG, pulsed MIG, flux-cored, DC stick, DC Lift-Arc and pulsed TIG from a 7-inch color LCD. Auto-Line hooks up to any single-phase voltage between 208 and 575 V without relinking, Pulsed MIG brings lower heat input for thin material, Program mode saves favorite weld settings, and Auto-Set Elite supplies predefined settings.

Highlights

  • Dual cylinder EZ-Latch cart with an elevated holder for the gun and cables included

  • TIG kit: 25 ft air-cooled A-150 torch and RFCS-14 foot control (20 ft)

  • Auto-Line: any single-phase input from 208-575 V with no manual linking

  • MIG, pulsed MIG, flux-cored, DC stick, DC Lift-Arc and pulsed TIG

  • 7-inch color LCD, Auto-Set Elite and Program mode

  • 84 lb welder with a 5-350 A amperage range; 15 ft 250-amp MDX MIG gun included

Specifications

Brand

Miller

Manufacturer part number

951768

Processes

MIG, pulsed MIG, flux-cored, DC stick, DC Lift-Arc, pulsed TIG

Amperage range

5-350 A

Input power

Any single-phase input, 208-575 V (Auto-Line)

Open-circuit voltage

81 VDC max

Mild steel thickness

22 ga.-1/2 in. (MIG); 24 ga.-3/8 in. (TIG); 16 ga.-5/16 in. (stick)

Aluminum thickness

18 ga.-1/2 in. (MIG)

Weight

84 lb (machine only)

Display

7-inch color LCD

MIG gun

15 ft (4.5 m) 250-amp MDX, for Bernard S Series consumables

Drive rolls

0.035/0.045 in (0.9/1.2 mm) reversible

Cart

EZ-Latch dual cylinder, elevated gun and cable holder

TIG torch

25 ft A-150, air cooled

Foot control

RFCS-14, 20 ft

What's in the box

  • Multimatic 255 power source with 10 ft (3 m) power cord (no plug included)

  • 15 ft (4.5 m) 250-amp MDX MIG gun for Bernard S Series consumables (0.035-0.045 in liner)

  • EZ-Latch dual cylinder cart with elevated gun and cable holder

  • 10 ft (3 m) cable with electrode holder and 50 mm Dinse connector

  • 10 ft (3 m) work cable with clamp and 50 mm Dinse-style connector

  • Flow gauge regulator and gas hose for argon or Ar/CO2 mix

  • Extra contact tips

  • 0.035/0.045 in (0.9/1.2 mm) reversible drive rolls

  • Material thickness gauge

  • TIG kit: 25 ft A-150 air-cooled TIG torch

  • TIG kit: RFCS-14 foot control (20 ft)

  • TIG kit: 10-pin to 14-pin adapter cord

  • TIG kit: regulator with 5 ft gas hose

  • TIG kit: AK1C TIG torch accessory kit

Good to know

  • Check the input power (voltage, phase and amperage) against your supply before you order.

    bottom of page