Miller Syncrowave 212 AC/DC TIG Welder, Air-Cooled, Wireless Foot Control

The Miller Syncrowave 212 with wireless foot control is an AC/DC TIG/stick welder for light-industrial and personal use. This package pairs the 54 lb power source with a wireless foot control (301580) and a 12 ft, 150 A air-cooled TIG torch, covers 20-210 A in TIG, runs on 120 V or 240 V single-phase power and uses Auto-Set for quick parameter setup.

Auto-Set fills in weld parameters from a few taps, Pro-Set confirms a manual TIG or stick setting when its adjustment line turns green, and the easy-to-navigate LCD means less time spent pushing buttons. DC TIG pulse lowers heat input and distortion and can raise puddle agitation, arc stability and travel speed. Stick output spans 30-200 A, and two 6 ft cords, one for 120 V and one for 240 V, connect to common receptacles without tools.

Package contents: the Syncrowave 212, both input cords, the air-cooled 150 A TIG torch (12 ft, Dinse connector), a 15 ft work cable with clamp and a 15 ft electrode holder with Dinse connectors, the wireless foot control, a regulator/flow gauge with 5 ft gas hose, a gas lens kit for the torch and a material thickness gauge. A Coolmate 1S water cooler can be added (B11N17 coupler required for a water-cooled torch on the 195380 Dinse connector), as can a Spoolmate 150 spool gun (301272) with adapter (301861) for MIG at 30-175 A.

Highlights

• AC/DC TIG 20-210 A; DC stick 30-200 A; MIG 30-175 A with spool gun

• Wireless foot control (301580) and 12 ft, 150 A air-cooled TIG torch

• 120-240 V, 1-phase, 50/60 Hz; separate 120 V and 240 V cords, no tools

• Auto-Set and Pro-Set parameter setup; DC TIG pulse

• Optional Coolmate 1S water cooler and Spoolmate 150 spool gun

• 54 lbs (power source only); 17.5 x 11.25 x 21.5 in. (H x W x L)

Specifications

What's in the box

• Syncrowave 212 power source

• 6 ft 120 V primary cord and 6 ft 240 V power cord

• 12 ft 150 A air-cooled TIG torch with Dinse connector

• 15 ft work cable with clamp and Dinse connector

• 15 ft electrode holder with Dinse connector

• Wireless foot control (301580)

• Regulator/flow gauge and 5 ft gas hose

• Gas lens accessory kit for TIG torch

• Material thickness gauge

Good to know

• Check the input power (voltage, phase and amperage) against your supply before you order.