Miller XMT 650 CC/CV Stationary MIG Welder Package, 70 Series Feeder, 380/460V

The Miller XMT 650 CC/CV Stationary MIG Welder Package combines the XMT 650 CC/CV power source (907843) with a 70 Series feeder and 15 ft Bernard 400 A MIG gun, plus an Industrial MIG 4/0 kit with lug connections. The power source runs on 380/460 V three-phase input and has neither ArcReach nor polarity reversing.

Also in the package are 0.035/0.045 in. V-groove drive rolls (235336) and AccuLock S contact tips, three for 0.035 in. wire and two for 0.045 in. wire. The XMT 650 CC/CV is the shop-focused version of the XMT 650, designed for manufacturing and fabrication rather than the outdoor work that the ArcReach models target, and this stationary package pairs it with a wire feeder and gun for MIG (GMAW) welding.

Power source features include a 14-pin receptacle, Auto Remote Sense, a remote-in-use indicator, arc control and a 120 V auxiliary receptacle. The XMT 650 CC/CV weighs 187 lbs and measures 28.2 in. high, 16.7 in. wide and 31.6 in. deep, and like every XMT 650 it needs three-phase power. No running gear comes with this stationary package.

Highlights

• XMT 650 CC/CV power source (907843) with 70 Series feeder and 15 ft Bernard 400A MIG gun

• Industrial MIG 4/0 kit with lug connections (300390)

• .035/.045 V-groove drive rolls (235336); Acculock S tips, three .035 and two .045

• 380/460 V input, three-phase only; no ArcReach or polarity reversing

• 14-pin receptacle, Auto Remote Sense and 120 V auxiliary receptacle on the power source

• Power source: 187 lbs; 28.2 in. H x 16.7 in. W x 31.6 in. D

Specifications

What's in the box

• XMT 650 CC/CV power source (907843)

• 70 Series feeder with 15 ft Bernard 400A MIG gun

• Industrial MIG 4/0 kit with lug connections (300390)

• .035/.045 V-groove drive rolls (235336)

• Acculock S contact tips: three .035 and two .045

Good to know

• Check the input power (voltage, phase and amperage) against your supply before you order.