MK Products Prince XL Push-Pull MIG Gun, 225A Air-Cooled, MK 7-Pin, 50 ft

The MK Products Prince XL push-pull MIG gun is an air-cooled pistol-grip gun designed for precise, dependable wire feeding, with a 100% duty cycle at 225 A. This version has an MK 7-pin connection for MK machines and a 50 ft lead, and it takes solid and hard wire from .030 to .045 in. as well as aluminum wire from .030 to 1/16 in. (0.8-1.6 mm).

Straight and curved barrels come in 6, 12 and 18 in. lengths, and the EZ-Lock mount turns a full 360°, so a curved barrel can be set at the right angle for each joint. A 3¾-turn potentiometer that is easy to adjust sits recessed in the base of the handle, where it stays protected, and the pistol-grip gun is meant for hours of continuous wire feed with little operator fatigue.

The gun comes with a 6 in. 180° air-cooled barrel, a No. 10 gas cup with a 5/8 in. ID, a 3/8 in. diameter contact tip, a knurled drive roll, an idler wire feed assembly kit, a Teflon liner and a snake skin protective sheath. Because this push-pull gun is air-cooled, it needs no coolant supply for MIG (GMAW) aluminum welding.

Highlights

• 50 ft lead and MK 7-pin connection

• Air-cooled; 100% duty cycle at 225 A

• Feeds .030-.045 in. solid/hard wire and .030-1/16 in. (0.8-1.6 mm) aluminum wire

• 360° EZ-Lock barrel; 6, 12 and 18 in. straight or curved barrels

• 3¾-turn potentiometer protected in the handle base

Specifications

What's in the box

• 6 in. air-cooled (A/C) barrel, 180°

• No. 10 gas cup, 5/8 in. ID

• Contact tip, 3/8 in. diameter

• Knurled drive roll

• Idler wire feed assembly kit

• Teflon liner

• Snake skin protective sheath