Optrel e3000X PAPR Welding Respirator, Vegaview 2.5 Helmet, NIOSH P100, 4580.051

The Optrel e3000X PAPR with Vegaview 2.5 welding helmet is a powered air-purifying welding respirator built on the belt-worn e3000X blower, whose HEPA class Th3 filter blocks more than 99.8% of particulates. It is NIOSH P100 certified (42 CFR 84), protects against smoke, dust and hexavalent chromium (CrVI), and runs about 12 hours of continuous use per charge.

A face seal keeps smoke and debris away from the welder, while two-channel air distribution supplies the mouth and nose with clean air and sends a second stream across the forehead for cooling. Three airflow levels, from 200 to 240 nl/min, suit different conditions and comfort preferences. Integrated flow sensors check the airflow automatically at start-up, and audible and visible alarms warn of a missing or clogged filter or a low battery.

The belt-based blower rides at the wearer's center of gravity with easy-to-reach buttons, and swiveling hose connections at the helmet and blower allow a full range of movement with less risk of snagging. Including filter, belt and battery, the blower unit weighs 3.5 lbs. Along with the Vegaview 2.5 welding helmet, the kit includes the blower with its hose and belt, a protection sleeve, a TH3P R SL filter, the battery and its charger, and an instruction manual.

Highlights

• Vegaview 2.5 welding helmet supplied with the e3000X blower

• HEPA class Th3 filter removes more than 99.8% of particulates

• NIOSH P100 certification (42 CFR 84)

• Three airflow levels, 200 to 240 nl/min, with automatic start-up flow check

• Li-ion battery gives about 12 hours of continuous use on a full charge

• Alarms for a missing or clogged filter and for low battery

Specifications

What's in the box

• Vegaview 2.5 welding helmet

• Blower unit with hose and belt

• Protection sleeve

• TH3P R SL filter

• Battery and battery charger

• Instruction manual